Shop Our Best Sellers & New Arrivals
The Multi-Platform Radio Chassis (MPRC) Mk5 is a modular and scalable approach to radio retention that can accommodate a wide range of radio models. - The chassis is a three-part system that allows the internal dimensions of the MPRC to expand and contract as needed. With this wide fitment range, almost any radio model can be properly secured and ventilated while maintaining the full range of functions on the handset. - The chassis backer is a semi-rigid board that can be mounted to Cummerbunds, Chest Rigs, and packs using its two MOLLE columns, or on the waist via the integrated belt pass-through. The board is stiff enough to provide a firm mounting surface for any radio and keep it immobile regardless of size. - The base of the MPRC Mk5 is a tri-flap battery cup that is MOLLE adjustable for height on the front of the chassis backer. - The MOLLE interface provides users with a wide range of adjustability without sacrificing any durability or structural integrity in the chassis. - The tri-fold flaps enable the user to swap batteries without removing the radio or unplugging any wires and can be resecured with an additional layer of redundancy via the fastex buckle that runs through the front.- The top strap can be threaded through the chassis backer in one of two slots to further accommodate the wide variety of radio sizes, and will help the user configure the MPRC Mk5 so that it does not impede buttons or toggles on the handset. Recommended Radios for use with the MPRC Mk5 - Persistent Systems MPU5 - L3/Harris AN/PRC-163 - L3/Harris AN/PRC-152 - Thales AN/PRC-148 - Motorola XTS 5000 - Motorola APX 8000 - Motorola APX 7000 - & more… Smallest Recommended Radio Compatibility dimensions*5.5” Tall - 2.75” wide - 1.25” Deep Largest Recommended Radio Compatibility dimensions* 12+” Tall - 4” wide - 4” Deep *These dimensions be further expanded or retracted via micro adjustments to the Veclro on the battery cup and top strap. NOTE: While Baofeng and other similar products will fit in the MPRC Mk5, we recommend considering our Liberty Dynamics Flash Bang Pouch or SPUD POUCH for small handsets. It provides secure retention, and a much more compact solution for smaller radios. - [ CLICK TO VIEW OPERATOR GUIDE ] If you are ordering for a MIL/LEO unit, please visit our GOVERNMENT SALES page for further info.
The Nalgene Water Bottle Pouch Nalgene Bottles have proliferated throughout the entire force because of their low cost and robustness. Unfortunately there are not a lot of secure options out there on the market. The pouch was designed to be lightweight, form fitting and completely secure. - A pull tab at the front of the pouch assists with replacing and removing the bottle while eyelet holes on backside of the securing strap provide tie down points for your bottle. - This pouch is designed to be mounted to MOLLE and consumes 2 Columns. Designed to hold a 32oz Nalgene bottle Dimensions (Approximate) Height 8" x Width 3 1/4" x Depth 3 3/4" Some images shown with optional accessories, sold separately. If you are ordering for a MIL/LEO unit, please contact sales@spiritussystems.com
The Expander Wing Mk-2 was built as direct replacement for the original Spiritus Systems Micro Fight Expander Wing Set with a focus on enhancing the product’s functionality for Plate Carriers. - The wing attaches to a Micro Fight Chassis or 556 Placard with a hook & loop flap and can be mounted for increased storage capacity on a chest rig or under the Cummerbund of a LV-119. - Unlike its predecessor, the Expander Wing Mk-2 is completely reversible, and can be used on either the right or left side of the torso without any reduction in functionality or storage capacity. - Spiritus Systems sells the Expander Wing Mk-2 individually for end users who do not require a full set for their loadout. (Reminder: If you want a set of these, make sure to add TWO to the cart.) - Wings used for chest rigs are mounted to the soft loop field on the back side of the Micro Fight Chest Rig. They also utilize our unique loop over design that attaches to your Fat Straps to ensure a comfortable and stable attachment that will not sag even with heavy items placed inside. - When used in conjunction with plate carriers, the Expander Wing Mk-2 will integrate with both hook & loop and TUBES cummerbunds. - The wing features a TUBES bar pass-through so the cummerbund can be attached or separated without the need to remove the expander wing. - The Expander Wing Mk-2 is designed to hug the body which reduces their signature and securely holds items in place. - The base Expander Wing Mk-2 pocket depth is 6" however, the adjustable internal retention strap can be lengthened or shortened to create the perfect pocket depth for your items. - The top of the pocket also features double eyelets and a bungee retention kit, so radios and magazines remain secure during periods of movement. - The expander wing will hold most small & medium caliber rifle magazines as well as a variety of radio platforms like the MPU5, 152, 163, and smaller units like Motorola XTS 5000. If you are ordering for a MIL/LEO unit, please visit our GOVERNMENT SALES page for further info.
The MOLLE Expander Wing is a versatile and ambidextrous platform designed for mounting knives, pouches, and other essential gear underneath the Cummerbund of the LV-119 Plate Carrier. This innovative wing seamlessly integrates with the Front Plate Bag through a double-sided hook and loop field, which can be securely mounted on the front plate bag's loop panel. Additionally, it can be attached under a Micro Fight Chassis or 556 Placard. - One notable feature of the wing is its integration of loops and a pass-through mechanism for female Tubes™ bars. - This unique design allows the wing to seamlessly work with a Tubes™-equipped LV-119 Plate Carrier. Moreover, it enables the integration of Tubes™ on a plate carrier that would not typically support them. - The MOLLE grid of the wing provides a robust mounting platform, as it is built with ballistic Tegris material. This ensures a solid foundation for attaching various items. - The grid incorporates regularly-spaced metal eyelets, allowing for the secure lashing or zip-tying of non-standard items to the wing. - The MOLLE grid consists of two columns and two rows, providing sufficient space for customization and organization. If you are ordering for a MIL/LEO unit, please visit our GOVERNMENT SALES page for further info.
The Pangolin Flap is a multi-purpose pouch closure that can be used in conjunction with the SPUD Pouch, Micro Fight Chassis, or other 3rd party products. They will attach to any pouch or magazine holder with a loop field on the front. - The flap features a multi-directional laser-cut scrim pattern that allows it to wrap and form around irregular objects when pulled tight. - This reduces equipment slop when secured in the pouch. - Pangolin Flaps are sold individually but can be run in groups in the Micro Fight Chest Rig System by securing them between the elastic Magazine Inserts, and the chassis. If you are ordering for a MIL/LEO unit, please visit our GOVERNMENT SALES page for further info. WARNING: This product is ONLY compatible with the Micro Fight MK5 MK4 and MK3 Chassis. It is not compatible with the MK2 or MK1 Chassis, nor plate carrier kangaroo pouches.
The Submachine Gun Pangolin Flap is a multi-purpose pouch closure that can be used in conjunction with the Micro Fight MKV Chassis, or other 3rd party products. They will attach to any pouch or magazine holder with a loop field on the front. - The flap features a multi-directional laser-cut scrim pattern that allows it to wrap and form around irregular objects when pulled tight. This reduces equipment slop when secured in the pouch. - Pangolin Flaps are sold individually but can be run in groups in the Micro Fight Chest Rig System by securing them between the elastic Magazine Inserts, and the chassis. Note: the Arid Colorway of the Submachine Gun Pangolin Flap will be available at Presample Depot. If you are ordering for a MIL/LEO unit, please visit our GOVERNMENT SALES page for further info. WARNING: This product is ONLY compatible with the Micro Fight MK5 MK4 and MK3 Chassis. It is not compatible with the MK2 or MK1 Chassis, nor plate carrier kangaroo pouches.
The Universal Retention Kit is a simple way to add a tourniquet to your Micro Fight Chassis, or as a replacement set for our Sub Abdominal Pouches. Simply route the shock cord through provided Cord Locks and then through the grommets on the bottom of your Micro Fight. Use the provided Cord Locks to tighten the the elastic loops around your TQ. SOLD AS A PAIR. If you are ordering for a MIL/LEO unit, please visit our GOVERNMENT SALES page for further info.
Replacement Split-Back 1 Inch ITW NEXUS Buckles. Sold in Sets of 4. Works with the Micro Fight Chassis Mk4, Micro Fight Chassis MkV, Placard 5.56 x .45, LV-119 Front Plate Bags or anything else that may need them. If you are ordering for a MIL/LEO unit, please visit our GOVERNMENT SALES page for further info.
Replacement shock cord for attaching your cummerbund to your REAR plate bag. Sold in a Sets of 2. Compatible with all of our Cummerbunds and Plate Bags. Made in the USA. If you are ordering for a MIL/LEO unit, please visit our GOVERNMENT SALES page for further info.
The Recovery Handle™ Mk2 sets the standard for emergency casualty evacuation and recovery in non-permissive environments. We are proud to have teamed up with the Direct Action Resource Center to realize their long standing vision and innovative design. - The system provides a reliable and repeatable method for dragging a casualty off of the “X” or away from the objective. - Unlike other drag handle systems it transfers the force of the evacuation to the hips of the casualty. This prevents the Plate Carrier from striking them in face, or cutting off their airway. - Because the strap deploys to a greater length it allows the operator performing the evacuation to stand straight up which prevents fatigue and helps maintain situational awareness. - The Recovery Handle™ mounts directly to the LV-119 Rear Plate Bag, or your MOLLE compatible vest and can be deployed in seconds with a quick pull of the handle. - The Recovery Handle™ Mk2 internally retains the excess webbing that would normally be tucked into your MOLLE loops, giving you a clean and snag free solution. - The system can easily be repackaged which makes it ideal for resetting the handle while preforming multiple iterations of training. The Recovery Handle™ Mk2 now features removable Tegris® stays with directional snaps that will unlock when enough force is used during deployment. This ensures the Recovery Handle™ Mk2 will reliably deploy from the rear plate bag on an incapacitated individual every time. NOTE: The Recovery Handle™ Mk2 DOES NOT INCLUDE the carabiner that will connect the system to the wearer's belt. We recommend the BFC (purchase separately here). If you decide to source your own belt carabiner, we recommend you use one with a proper load rating and safety features. If you are ordering for a MIL/LEO unit, please visit our GOVERNMENT SALES page for further info.
The BFC is our recommended solution for securing the looped end of the Recovery Handle™ Mk2 to your belt. It is a load-rated, auto-locking, carabiner manufactured by legendary climbing and safety company PETZL. It features an oversized profile that will accommodate nearly any battle belt on the market. It can be easily stowed on the Plate Carrier and is quickly mounted on the belt with one hand. NOTE: This is an integral component of the Recovery Handle™ MK2. You must purchase both for a complete system. This is a non-returnable product. If you are ordering for a MIL/LEO unit, please visit our GOVERNMENT SALES page for further info.
VEIL Solutions MagBlock Safety Mag Block insert for AR/M4 style rifles designed to be used in dry practice for training environments, CQB training, or as a safety block for competitions that require chamber flags / safety flags. Will hold bolt to the rear. "CLEAR" writing visible with port door open - does NOT force port door open. Safety Orange color. If you are ordering for a MIL/LEO unit, please visit our GOVERNMENT SALES page for further info.
1" QD Sling Swivel Set Constructed to extremely tight tolerances, the heavy duty body, loop and stainless steel bearing housings in this QD sling swivel will stand up to extended hard use. The 1.25" inch loop is designed to work well with 1" webbing slings, giving it just enough play to avoid binding or bunching. These sling swivels will interface with any standard QD sockets and are sold in packs of two. Made in the USA If you are ordering for a MIL/LEO unit, please visit our GOVERNMENT SALES page for further info.
The Hook. A simple method of attaching items securely where you want them. Easily stow your Gloves when not in use or use it to feed Chem Light bundles on your next objective. The Hook is designed to be utilized on the back side of your Micro Fight, or underneath the flap or Placard of a Plate Carrier. - Hook & loop surface area measures 3x4 Inches. - One side is Hook the other is Loop. Available in Jet Black only. If you are ordering for a MIL/LEO unit, please visit our GOVERNMENT SALES page for further info. Some images shown with optional accessories, sold separately.
The Spiritus Systems Pouch Insert Suite is designed to optimize your equipment through organization and increase performance by improving function. The inserts were designed to be modular, allowing you to mix and match them to your specific needs. - The Shotgun/123A Battery Pouch Insert is a simple yet effective design that allows you to carry Shotgun Shells or 123A batteries in a secure and organized fashion. - We utilized a larger footprint in order to give the insert stability and keep it in place even in the most non-permissive environments. - While most hook & loop placards on the market today are flimsy and unreliable, our Insert Suite is designed to stay in place exactly where you attach it. - Simply attach the hook field insert into your pouch or onto your soft loop lined accessory. Holds Six shotgun shells or Six 123A batteries. Compatible with Spiritus Systems Sub Abdominal and GP Pouches. Available in Jet Black. If you are ordering for a MIL/LEO unit, please visit our GOVERNMENT SALES page for further info. Some images shown with optional accessories, sold separately.
Old Glory. Store it in the Flag Bungee on your MOLLE Back Panel as you assault a far off objective, or just fly it with pride.Flag measures 3' x 5' Made in the USA. If you are ordering for a MIL/LEO unit, please visit our GOVERNMENT SALES page for further info.
